Portal:Telephones/Selected audio
Selected audio 1
Portal:Telephones/Selected audio/1
A dial tone (dialling tone in the UK) is a telephony signal sent by a telephone exchange or private branch exchange (PBX) to a terminating device, such as a telephone, when an off-hook condition is detected. It indicates that the exchange is working and is ready to initiate a telephone call. The tone stops when the first dialed digit is recognized. If no digits are forthcoming, the partial dial procedure is invoked, often eliciting a special information tone and an intercept message, followed by the off-hook tone, requiring the caller to hang up and redial. (Full article...)
Selected audio 2
Portal:Telephones/Selected audio/2
A busy signal (or busy tone or engaged tone) in telephony is an audible call-progress tone or audible signal to the calling party that indicates failure to complete the requested connection of that particular telephone call. (Full article...)
Selected audio 3
Portal:Telephones/Selected audio/3
The off-hook tone (also off-hook warning, howling tone, or howler tone) is a telephony signal for alerting a user that the telephone has been left off-hook without use for an extended period, effectively disabling the telephone line. (Full article...)
Selected audio 4
Portal:Telephones/Selected audio/4
Ringing tone (audible ringing, also ringback tone) is a signaling tone in telecommunication that is heard by the originator of a telephone call while the destination terminal is alerting the receiving party. The tone is typically a repeated cadence similar to a traditional power ringing signal (ringtone), but is usually not played synchronously. Various telecommunication groups, such as the Bell System and the General Post Office (GPO) developed standards, in part taken over by the European Telecommunications Standards Institute (ETSI) and other standards bodies. With modern cell phone and smartphone technology ringing tone can be customized and even used for advertising. (Full article...)
Selected audio 5
Portal:Telephones/Selected audio/5
The reorder tone, also known as the fast busy tone, or the congestion tone, or all trunks busy (ATB) tone is an audible call progress tone in the public switched telephone network (PSTN) that is returned to a calling party to indicate that the call cannot be processed through the network. (Full article...)
Selected audio 6
Portal:Telephones/Selected audio/6
Dual-tone multi-frequency signaling (DTMF) is a telecommunication signaling system using the voice-frequency band over telephone lines between telephone equipment and other communications devices and switching centers. DTMF was first developed in the Bell System in the United States, and became known under the trademark Touch-Tone for use in push-button telephones supplied to telephone customers, starting in 1963. DTMF is standardized as ITU-T Recommendation Q.23. It is also known in the UK as MF4. (Full article...)
Selected audio 7
Portal:Telephones/Selected audio/7
2600 hertz (2600 Hz) is a frequency in hertz (cycles per second) that was used in telecommunication signaling in mid-20th century long-distance telephone networks using carrier systems. (Full article...)
Selected audio 8
Portal:Telephones/Selected audio/8
In telephony, a special information tone (SIT) is an in-band international standard call progress tone consisting of three rising tones indicating a call has failed. It usually precedes a recorded announcement describing the problem. (Full article...)
Selected audio 9
Portal:Telephones/Selected audio/9
The TeleZapper is a device designed to reduce the number of telemarketing-related phone calls a household receives by imitating the tone signal normally played by a phone company to indicate a line has been disconnected. The Telezapper was created by Privacy Technologies, Inc, a wholly owned subsidiary of Royal Appliance Mfg. Co. (Full article...)
Selected audio 10
Portal:Telephones/Selected audio/10
Last-call return, automatic recall, or (on PBX and centrex service) camp-on, is a telecommunication feature offered by telephony service providers to subscribers to provide the subscriber with the telephone number, and sometimes the time, of the last caller. The service may also offer the facility to place a call to the calling party. (Full article...)
Selected audio 11
Portal:Telephones/Selected audio/11
A red box is a phreaking device that generates tones to simulate inserting coins in pay phones, thus fooling the system into completing free calls. In the United States, a nickel is represented by one tone, a dime by two, and a quarter by a set of five. Any device capable of playing back recorded sounds can potentially be used as a red box. Commonly used devices include modified Radio Shack tone dialers, personal MP3 players, and audio-recording greeting cards. (Full article...)
Selected audio 12
Portal:Telephones/Selected audio/12
A disconnect tone in telephony is a tone provided to the remaining party to a call after the remote party hangs up. Typically, the disconnect tone is a few cycles of the reorder or busy tone (e.g. in US), or between five and fifteen seconds of the Number Unobtainable tone (e.g. in UK). (Full article...)
Selected audio 13
Portal:Telephones/Selected audio/13
A blue box is an electronic device that produces tones used to generate the in-band signaling tones formerly used within the North American long-distance telephone network to send line status and called number information over voice circuits. This allowed an illicit user, referred to as a "phreaker", to place long-distance calls, without using the network's user facilities, that would be billed to another number or dismissed entirely as an incomplete call. A number of similar "color boxes" were also created to control other aspects of the phone network. (Full article...)